Herlig International

Herlig Cutting Disc

Availability: In Stock

Cutting discs are made of abrasive materials such as aluminium oxide, silicon carbide, or zirconia alumina, which are bonded together with resin or other materials to form a hard, durable surface. The abrasive material is applied to a reinforced disc that is made of a strong and durable material such as fiber glass or plastic.

Description

The size of the cutting disc can vary depending on the specific application and the tool being used. Common sizes include 4-inch, 4.5-inch, 5-inch, 6-inch, and 7-inch diameter discs. The thickness of the disc can also vary, with thinner discs typically being used for cutting sheet metal and thicker discs being used for cutting thicker materials such as concrete or steel.

The speed of the cutting disc is an important factor to consider when using it for cutting. The maximum safe operating speed is usually printed on the disc itself and should not be exceeded. Exceeding the maximum speed can cause the disc to fail, potentially resulting in injury to the operator.

It is important to select the right type and size of cutting disc for the specific material and application, as using the wrong type of disc can result in damage to the disc, the tool, or the material being worked on. Additionally, it is important to follow proper safety procedures when using cutting discs, including wearing appropriate personal protective equipment such as eye protection and gloves, and ensuring that the tool and disc are properly secured and used at the appropriate speed and angle.

here’s a general size chart for cutting discs:

  • 4 inch (100mm) diameter
  • 4.5 inch (115mm) diameter
  • 5 inch (125mm) diameter
  • 6 inch (150mm) diameter
  • 7 inch (180mm) diameter
  • 9 inch (230mm) diameter

Note that there may be other sizes available, and the specific sizes offered may depend on the manufacturer and supplier. It’s important to select the appropriate size of cutting disc for the tool being used and the application at hand. Be sure to consult the manufacturer’s recommendations and guidelines before using any cutting disc.

here’s a general thickness chart for cutting discs:

  • Ultra-thin cutting discs: 0.8-1.0mm thickness
  • Standard cutting discs: 1.2-2.0mm thickness
  • Thick cutting discs: 2.0-2.5mm thickness
  • Extra-thick cutting discs: 2.5-3.0mm thickness

Note that the specific thicknesses available may vary depending on the manufacturer and supplier. It’s important to select the appropriate thickness of cutting disc for the tool being used and the application at hand. Be sure to consult the manufacturer’s recommendations and guidelines before using any cutting disc.

Reviews

There are no reviews yet.

Be the first to review “Herlig Cutting Disc”

Your email address will not be published. Required fields are marked *